In the kitchen
-
Slim enough for a kitchen island.
-
Power where you cook, hidden when you don’t.
-
It’s the finer details that set the best homes apart.
Why the V3LW
Motorised power, fast charging and wireless convenience, hidden in your worktop.
Qi wireless charging lid
Place your phone on the lid to charge it at up to 10 W.
Closed-lid protection
A seal in the closed lid helps keep everyday splashes and crumbs out. IP20 when open.
Fits a 65 mm hole
Anything from 65 to 70 mm fits. The 76 mm flange covers the edge.
Plug and play
A 1.8 m detachable lead with a fused UK plug. No hardwiring.
Elegant, high-quality build
An extruded aluminium body with a slim, low-profile lid.
Form follows function
Two UK sockets, two USB-C ports and a USB-A port, with a Qi charging lid. USB-C1 gives up to 67 W for laptops.
Before you buy
Check these four things and the V3LW will suit your worktop.
65–70 mm fits. One of the smallest in our range.
Stone, timber or laminate.
From the top of the worktop, plug included.
To a socket below.
Installs in six steps
No electrical work needed. It plugs into a socket under the worktop.
- 1
Step 1: Check the space: worktop up to 80 mm thick, 580 mm clear below, and a socket within reach of the 1.8 m lead.
- 2
Step 2: Tape the 1:1 template in place, mark the centre and cut a 65 mm hole (65–70 mm fits).
- 3
Step 3: Unscrew the locking ring from the body and take it off.
- 4
Step 4: Feed the body down through the hole until the flange sits flat on the worktop.
- 5
Step 5: From under the worktop, screw the ring back up and tighten it against the underside. Don’t over-tighten.
- 6
Step 6: Push the lead into the inlet under the unit, plug it in and double-tap to raise it and check the sockets and USB ports.
Full instructions are in the user manual.
Tech specs
Hole size
The threaded body has to fit through the hole, and the flange has to sit on the worktop around it.
Under 65 mm
Too tight. The threaded body won’t go through.
65–70 mm
Just right. The body drops through and the 76 mm flange sits on the worktop.
Over 70 mm
Too loose. The 76 mm flange has too little worktop to sit on.
Cross-sections, not to scale.
Size and weight
- Lid
- Ø 80 mm
- Flange
- Ø 76 mm; covers the hole and rests on the worktop
- Height when raised
- 198 mm above the worktop
- Below the worktop
- About 520 mm body; allow 580 mm clear, plug included
- Length raised
- 718.5 mm, top to base
- Weight
- 1.57 kg
Installation
- Cut-out
- 65 mm (65–70 mm fits)
- Worktop thickness
- Up to 80 mm
- Clear space below
- 580 mm from the top of the worktop
- Lead
- 1.8 m, detachable, fitted UK plug with 13 A fuse
- Inlet
- IEC C14, under the unit
Electrical
- Rated voltage
- 230 V AC, 50 Hz
- Rated load
- 13 A, 3,000 W total
- Power sockets
- 2 × UK
- Lead
- H05VV-F 3 × 1.5 mm²
- Protection
- IP20 when open, indoor dry locations
Charging
- USB-C1
- Up to 67 W (5–20 V Power Delivery)
- USB-C2
- Up to 20 W
- USB-A
- Up to 18 W
- USB-C1 + USB-C2
- 45 W + 20 W
- USB-C1 + USB-A
- 45 W + 18 W
- USB-C2 + USB-A
- 15 W shared
- All three ports
- 45 W + 15 W
- Wireless
- Qi, up to 10 W
Product
- Model
- V3LW-UK
- Finish
- White lid and sockets, silver aluminium body
- Materials
- Glass lid, PVC, ABS and aluminium
- Lift
- Motorised, double-tap button
- Operating temperature
- 0–40 °C
- Warranty
- 24 months, extendable to 4 years
- Box
- 60 × 19 × 14 cm, 2.9 kg
Dimensions and cut-out
Check the hole size, worktop thickness and the space needed below before you install. Select the drawing to open it full size.
(opens full size in a new tab)
Which pop-up is right for you?
V3LW
£209.95
- Motorised lift
- 65 mm cut-out
- 2 × UK sockets
- USB-C up to 67 W, USB-C 20 W, USB-A
- Qi wireless up to 10 W
- No light
V3C
£215.95
- Motorised lift
- 95 mm cut-out
- 2 × UK sockets
- USB-C up to 15 W, USB-A
- Qi wireless up to 10 W
- No light
V16
£149.95
- Gas-strut lift
- 102 mm cut-out
- 2 × UK sockets
- USB-C up to 65 W, USB-A up to 30 W
- Qi wireless up to 10 W
- Dimmable LED light
Safety and care
Where to use it
- Indoor, dry worktops only (IP20 when open).
- Keep the raised unit and any plugs in it dry.
Power
- Don't exceed 13 A / 3,000 W in total.
- Use only the supplied lead; don't cut or modify it.
Installing
- Keep 580 mm below the worktop clear of shelves, drawers and pipes.
- If you need a new socket, use a qualified electrician.
Lowering
- Remove every plug and cable before lowering it.
- Keep hands and objects clear while it moves.
Questions and answers
What size hole do I need?
65 mm. Anything from 65 to 70 mm fits; never cut outside that range. The worktop can be up to 80 mm thick, and you need 580 mm of clear space below the top of the worktop, which includes room for the plug under the unit. The 1:1 cut-out template marks the centre.
Do I need an electrician?
Not if there is already a socket under the worktop. The unit plugs in with its fused UK plug. Adding a new socket is fixed wiring and must be done by a qualified electrician.
Where can it go on a kitchen worktop?
The UK wiring rules (BS 7671) don’t set a distance from a sink, but IET guidance is to keep sockets at least 300 mm from the edge of a sink or draining board. Keep it away from the hob too. Plug it into a socket protected by a 30 mA RCD, which BS 7671 requires for sockets in homes. Read our pop up socket buying guide.
How do I raise and lower it?
Double-tap the button on the lid, then wait about a second. The built-in motor raises it; double-tap again to lower it. There are no springs to push down. Remove every plug and cable before lowering it.
Which charging ports are included?
Two USB-C ports, one USB-A port and a Qi wireless charging lid. USB-C1 gives up to 67 W on its own, USB-C2 up to 20 W and USB-A up to 18 W. With several ports in use, USB-C1 gives up to 45 W. Wireless charging is up to 10 W.
Can I charge a laptop from it?
Yes, from USB-C1, which gives up to 67 W on its own and 45 W while other USB ports are in use. USB-C2 gives up to 20 W.
How tall is it when raised?
It rises 198 mm above the worktop, and the lid is 80 mm across. Closed, only the lid shows.
Is it waterproof?
No. The closed lid includes a seal to help keep everyday splashes and crumbs out, but the open unit is IP20, so keep it and its connections dry when raised.
Should I choose the V3LW or the V3C?
The V3LW fits a smaller 65 mm hole. The V3C needs a 95 mm hole. Both are motorised and have wireless charging.
How do I make a warranty claim?
Submit a support request. We keep records matched to product serial numbers, so you don't need your receipt.
Still have a question?
Our team can help you choose the right pop-up and check it suits your worktop.
Email us



